Baliplus Bladerunners Systems Titanium Barebones
Description
[edit | edit source]The Baliplus Titanium Barebones is a clone from the Bladerunners Systems Titanium Barebones.
In its closed position, it is 14,7cm long.
In its open position, it is 25,6cm long.
The overall weight, with all hardware and all spacers installed, is 125g
Handle
[edit | edit source]Handle Design
[edit | edit source]Just like the authentic, it uses a Construction#Slab, Construction#Sandwich design.
Handle Dimension
[edit | edit source]The handles have a face to face thickness of 12.250mm
The handles are tapered and are 9.879mm wide near the pivots and 12.815mm wide near the end.
Handle Weight
[edit | edit source]One Construction#Slab weighs
One handle with both spacers, the zen pin and both zen screws installed, weighs 44g.
Blade
[edit | edit source]Blade Design
[edit | edit source]The Titanium Barebones features an upswept western tanto blade and is made out of VG10 stainless steel with a plunge grind.
Blade Dimensions
[edit | edit source]The upswept part of the blade has a cutting edge of 4cm the straight part is 6.5cm long. Which means that the overall cutting edge is 10.5cm.
The blade is around 3.175mm thick.
Blade Weight
[edit | edit source]The blade, with no hardware installed, weighs 31g.
Balance
[edit | edit source]The center of mass is 9,5cm away from the ends of the handles.