Editing Pivot System (section)

===Assembling Bushings===

When you are disassembling an already assembled bushing balisong, make sure to note the orientation of each bushing and washer. Reassemble everything exactly as it was. That means inserting each bushing into the same side of the blade using the same washer on the same side as before. That is because once a washer has been pressed against a bushing, the bushing will press a small groove into the washer, forming a bond, which means that the washer should only ever be re-used with that specific bushing with the same washer side facing the same bushing side. This is sometimes called "marrying".

Please also read [[#Assembling_Washer_Only]] as everything that has been written down there, also applies to bushing balisongs.