Baliplus Bladerunners Systems Titanium Barebones

Description

The Baliplus Titanium Barebones is a clone from the Bladerunners Systems Titanium Barebones.

In its closed position, it is 14,7cm long.

In its closed position, it is 25,6cm long.

The overall weight, with all hardware and all spacers installed, is 125g

Handle

Handle Design

Just like the authentic, it uses a Construction#Slab, Construction#Sandwich design.

Handle Dimension

The handles have a face to face thickness of 12.250mm

The handles are tapered and are 9.879mm wide near the pivots and 12.815mm wide near the end.

Handle Weight

One Construction#Slab weighs

One handle with both spacers, the zen pin and both zen screws installed, weighs 44g.

Blade

Blade Design

The Titanium Barebones features an upswept western tanto blade and is made out of VG10 stainless steel with a plunge grind.

Blade Dimensions

The upswept part of the blade has a cutting edge of 4cm the straight part is 6.5cm long. Which means that the overall cutting edge is 10.5cm.

The blade is around 3.175mm thick.

Blade Weight

The blade, with no hardware installed, weighs 31g.

Balance

The center of mass is 9,5cm away from the ends of the handles.